水热法主要提取因素对光皮木瓜多糖结构的影响

目的 优化水热法提取光皮木瓜（Chaenomeles sinensis）多糖的提取工艺条件，对光皮木瓜不溶性多糖的组成和结构进行分析。方法 预处理后的光皮木瓜样品经水热法提取、抽滤、冲洗，浓缩等操作，分别得到不溶性多糖、醇沉多糖和醇溶多糖，通过傅里叶变换红外光谱、扫描电子显微镜及X射线衍射分析不溶性多糖的组成和结构。 结果 多糖提取的较优条件为150 ℃/45 min，料液比1∶10 (W/V)；温度对水热法提取效果影响显著，适当升高温度、延长提取时间和减少料液比有利于多糖提取；高温虽能促进半纤维素溶解，但无法使木质素和木聚糖降解；即使提取温度不同，光皮木不溶性多糖的结构差异也极小；水热法提取光皮木瓜多糖不会导致多糖的功能性基团变化，只改变多糖的化学组成。结论 该研究可为光皮木瓜多糖的结构与功能研究提供实验依据，也为陕西白河光皮木瓜资源的综合利用提供研究参考。     

Inverse identification of constitutive parameters from heat source fields: A local approach applied to hyperelasticity

In this paper, a new inverse identification method of constitutive parameters is developed from full kinematic and thermal field measurements. It consists in reconstructing the heat source field from two different approaches by using the heat diffusion equation. The first one requires the temperature field measurement and the value of the thermophysical parameters. The second one is based on the kinematic field measurement and the choice of a thermo-hyperelastic model that contains the parameters to be identified. The identification is carried out at the local scale, ie, at any point of the heat source field, without using the boundary conditions. In the present work, the method is applied to the challenging case of hyperelasticity from a heterogeneous test. Due to large deformations undergone by the rubber specimen tested, a motion compensation technique is developed to plot the kinematic and the thermal fields at the same points before reconstructing the heterogeneous heat source field. In the present case, the constitutive parameter of the Neo-Hookean model has been identified, and its distribution has been characterized with respect to the strain state at the surface of a cross-shaped specimen.     

透明红外硫系薄膜非均匀性检测及影响因素

薄膜非均匀性的无损检测对于制备大面积高质量的红外透明薄膜尤为重要。针对红外薄膜光学均匀性难以获取的困难,提出了一种同时获得单层透明红外薄膜厚度和折射率均匀性的无损检测方法。实验上,通过磁控溅射法在二氧化硅衬底上制备了厚度约1.4μm红外透明Ge-Sb-Se硫系薄膜,然后在该薄膜上标定出36个80μm×80μm区域,利用显微傅里叶红外光谱仪测得该36个区域的透射谱,通过分段滤波的方法滤除背景噪声,运用改进的Swanepoel方法计算得到了薄膜每一个区域的厚度和折射率,进而精确获得该薄膜的厚度和折射率均匀性,结果表明精度优于0.5%。     

红外热成像在乳腺疾病检测的应用研究

乳腺疾病已严重危害女性身心健康,其中乳腺癌更位居全球范围内女性癌症发病率和死亡率首位,因此乳腺癌的早期发现意义重大。传统结构影像学早期检测疾病具有一定局限性,而红外热成像作为功能成像技术可为乳腺癌的早期筛查提供有效线索。因此本文主要就红外热成像在乳腺疾病的早期检测及预后评估的应用价值进行综述。     

The influence of light on the chroma of aviation kerosene

Influence of light on the chroma of low pressure hydrogenation aviation kerosene was studied using different lights (ultraviolet light, infrared light, sunlight and no light) in the same environment full of oxygen. UV light with short wavelength has the largest influence. Coloring substances were isolated by adsorption on neutral alumina followed by ether extraction and identified by using infrared spectrum, elemental analysis and two-dimensional GC-MS. Oxygen-containing compounds are main coloring substances. Light can provide the required energy to convert unsaturated hydrocarbons and heteroatom compounds to phenols, quinones and ketones.     

基于光谱分类模型的保险杠物证无损研究

采用中红外光谱结合化学计量学的方法对车用保险杠碎片进行鉴别，分别对52个车用保险杠碎片样本的全波段光谱数据、指纹区光谱数据和主成分分析降维后的光谱数据建立Fisher判别分析和K近邻算法2种分类模型，并对分类结果进行比较。结果表明，主成分分析提取特征变量后构建的分类模型，分类的准确率更高，对聚丙烯（PP）、PP/滑石粉、PP/滑石粉/碳酸钙（CaCO₃）3种类型的样本分类准确率达到92.3 %，对PP/滑石粉类型中的10种品牌样本分类准确率达到88.9 %，分类结果理想；在构建的2种分类模型中，Fisher判别分析模型的分类率远高于K近邻算法模型，分析认为K近邻算法模型受到样本不均衡的影响；中红外光谱结合化学计量学可以实现对车用保险杠碎片的准确区分，且满足快速、无损的检验要求。     

煤红外快速热解过程中床层对二次反应的影响

针对煤快速热解研究中样品添加量少(mg级)、焦油收集难等问题，本研究利用压片法制备微薄厚度(mm级)的煤层，并采用红外加热装置考察大添加量(g级)、微薄煤层的快速热解特性。对比堆积煤样和不同煤压片厚度(1.5~3 mm)与个数(1~2)的压片煤样热解特性发现，压片煤层热解过程的二次反应受到明显抑制，焦油产率急剧增加，在1000℃时达9.96%，为格金分析的1.5倍，实现油气产量的同步增长。模拟蒸馏分析发现，堆积状态下焦油以沥青质为主，而微薄煤层制焦油含大量轻油、酚油、萘油、洗油和蒽油。GC-MS和FTIR分析表明，随煤层厚度和个数的减少，焦油组分和含量提高，芳香烃类和含氧官能团吸收增加，进一步验证煤快速热解过程中煤层厚度对焦油产率和品质的影响，揭示在二次反应充分抑制下煤高温热解的初级反应特性。     

塑料牙刷柄的傅立叶变换红外光谱分析

本文采用傅立叶变换光谱法对13种不同品牌的白色牙刷柄塑料进行了红外光谱分析,实验结果表明,依据红外光谱数据的异同,能够对不同品牌的牙刷柄样品进行鉴别。